The ram slides back and forth above the work. Table motion may be controlled manually, but is usually advanced by an automatic feed mechanism acting on the feedscrew. The height of the table can be adjusted to suit this workpiece, and the table can traverse sideways underneath the reciprocating tool, which is mounted on the ram. The workpiece mounts on a rigid, box-shaped table in front of the machine. Note that the drive arm revolves through a smaller angle on the return stroke than for the cutting stroke, resulting in a quicker return stroke and more powerful cutting stroke. The vertical shaper is essentially the same thing as a slotter (slotting machine), although technically a distinction can be made if one defines a true vertical shaper as a machine whose slide can be moved from the vertical. Vertical shapers are generally fitted with a rotary table to enable curved surfaces to be machined (same idea as in helical planing). Shapers are mainly classified as standard, draw-cut, horizontal, universal, vertical, geared, crank, hydraulic, contour and traveling head, with a horizontal arrangement most common. The depth of the cut increments by moving the workpiece, and the workpiece is fed by a pawl and ratchet mechanism. The return is governed by a quick return mechanism. In a standard shaper, cutting of material takes place during the forward stroke of the ram and the return stroke remains idle. The ram reciprocates and the cutting tool, held in the tool holder, moves forwards and backwards over the work piece. The table may be supported at the outer end. The work piece is rigidly held in a vise or clamped directly on the table. Adding axes of motion to a shaper can yield helical toolĪ single-point cutting tool is rigidly held in the tool holder, which is mounted on the ram. The ram is typically actuated by a mechanical crank inside the column, though hydraulically actuated shapers are increasingly used. Its cut is analogous to that of a lathe, except that it is (archetypally) linear instead of helical.Ī wood shaper is a functionally different woodworking tool, typically with a powered rotating cutting head and manually fed workpiece, usually known simply as a shaper in North America and spindle moulder in the UK.Ī metalworking shaper is somewhat analogous to a metalworking planer, with the cutter riding a ram that moves relative to a stationary workpiece, rather than the workpiece moving beneath the cutter. In machining, a shaper is a type of machine tool that uses linear relative motion between the workpiece and a single-point cutting tool to machine a linear toolpath. Machine tool which linearly cuts or grinds the workpiece Shaper tool slide, clapper box and cutting tool Shaper with boring bar setup to allow cutting of internal features, such as keyways, or even shapes that might otherwise be cut with wire EDM.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |